Product ID:SOLDER SN 60 (SN60PB40) WRAP 3
MSDS Date:03/11/1992
FSC:3439
NIIN:00-095-3672
MSDS Number: BQWJY

MULTICORE SOLDERS

CANTIAGUE ROCK RD
WESTBURY, NY 11590
US

Emergency Phone: 214-238-1224

Info Phone: 214-238-1224

Preparer: ROBERT L. GILBERT

Cage: 03051

MULTICORE SOLDERS

WESTBURY, NY 11590 US

Telephone: 214-238-1224

Cage: 03051

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 35-40%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 55-60%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9293

ROSIN (MAY DECOMPOSE DURING SOLDERING TO

CAS: 8050-09-7

Fraction By Weight: 1 - 3%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: WEAKNESS,VOMITING,LOSS OF
APPETITE, CONVULSIONS,STUPOR, POSSIBLY COMA. DUST,VAPOR OR FUMES
MAY BE IRRITATING TO SKIN,EYES, RESPIRATORY SYSTEM. CHRONIC:
WEAKNESS, INSOMNIA, HYPERTENSION, SLIGHT IRRITATION OF EYES,
HEADACHE, POSSIBLE PARALYSIS. LEAD MAY DAMAGE BLOOD-FORMING,
NERVOUS, URINARY, REPRODUCTIVE SYSTEMS.
Explanation of Carcinogenicity:FORMALDEHYDE FORMED DURING THE
DECOMPOSITION OF ROSIN FLUX IS LISTED AS A SUSPECTED CARCINOGEN BY
ACGIH.
Effects of Overexposure:WEAKNESS, VOMITING, LOSS OF APPETITE,
CONVULSIONS, STUPOR, COMA, SKIN IRRITATION, EYE IRRITATION,
RESPIRATORY SYSTEM IRRITATION, INSOMIA, HYPERTENSION, HEADACHE,
PARALYSIS, AND DAMAGE OF BLOOD-FORMING , NERVOUS, URINARY, AND
REPRODUCTIVE SYSTEMS.
Medical Cond Aggravated by Exposure:LEAD AND ITS INORGANIC COMPOUNDS
ARE NEUROTOXINS WHICH MAY PRODUCE NEUROPATY. ROSIN IS AN ALLERGEN.

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. GET MEDICAL
ATTENTION IF SYMPTOMS PERSIST. SKIN: WASH WITH SOAP AND WATER.
INHALATION: MOVE TO FRESH AIR. GET MEDICAL ATTENTION IF
EXPERIENCING EFFECTS OF OVER EXPOSURE. INGESTION: GET IMMEDIATE
MEDICAL ATTENTION.

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING AND
NIOSH-APPROVED FULL FACE PIECE, SELF-CONTAINED BREATHING APPARATUS
OPERATED IN THE POSITIVE-PRESSURE MODE.
Unusual Fire/Explosion Hazard:DO NOT USE WATER ON FIRES WHERE MOLTEN
METAL IS PRESENT. HIGH TEMPERATURES MAY PRODUCE HEAVY METAL FUMES,
DUSTS AND OR VAPORS.

Spill Release Procedures:PARTICULATE MATTER SHOULD BE STORED IN DRY
CONTAINERS FOR LATER DISPOSAL. DUST MATERIAL SHOULD BE VACUUMED OR
WET SWEPT. DO NOT USE COMPRESSED AIR OR DRY SWEEPING AS A MEANS OF
CLEANING.
Neutralizing Agent:NOT APPLICABLE.

Handling and Storage Precautions:WASH HANDS WITH SOAP AND WATER AFTER
HANDLING SOLDER. STORE IN DRY AREA AWAY FROM STRONG OXIDIZERS.
AVOID BREATHING SMOKE DURING SOLDERING.
Other Precautions:NONE KNOWN.

Respiratory Protection:NONE NORMALLY REQUIRED. FOLLOW SPECIFICATIONS IN
29 CFR 1910.1025 (F) IF EXPOSURE EXCEEDS PEL.
Ventilation:LOCAL EXHAUST TO REMOVE SMOKE FROM BREATHING AREA.
MECHANICAL (GENERAL) IS NORMALLY ADEQUATE.
Protective Gloves:IMPERVIOUS.
Eye Protection:FACE SHIELD OR SAFETY GLASSES.
Other Protective Equipment:EYE WASH STATION, EMERGENCY SHOWER. PERSONAL
CLOTHING AND SHOES SHOULD BE PROTECTED FROM CONTAMINATION.
Work Hygienic Practices:DO NOT EAT, DRINK OR SMOKE IN WORK AREA. WASH
AFTER HANDLING AND BEFORE EATING, DRINKING, OR SMOKING.
Supplemental Safety and Health

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:361F,183C
Spec Gravity:8 @25C
Solubility in Water:INSOLUBLE
Appearance and Odor:GRAY METAL WITH NEUTRAL ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:HIGH TEMPERATURES MAY PRODUCE HEAVY
METAL FUMES, DUST AND/OR VAPORS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF HAZARDOUS WASTES IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS. CONSULT A LICENSED HAZARDOUS
WASTE COMPANY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.